The IRIDIS Light System has a six-inch (150mm) diameter extruded aluminum light guide that is robust enough to withstand the harsh industrial environments found in many web inspection applications. Light from the 400W metal halide luminaire at one or both ends of the light guide is emitted through a one-inch wide aperture. Application specific optics within the aperture produce highly intense and uniform light tailored to the material and scanning geometry. Lamps provide up to 15,000 hours of life and are operated with high frequency controllers with feedback sensors to maintain stability over time. The IRIDIS system is available in standard emitting lengths from 24" up to 120" in 12" (610mm to 3m in 305mm) increments. All systems are provided with simple two piece mounting brackets for easy installation. Lamps are maintained off the web at the ends of the light guide by releasing four latches to remove the luminaire housing.
Designed specifically for use with line scan CCD cameras
Intense light output
Long emitting lengths (up to 120"/3m)
Rugged construction for harsh industrial environments
Application specific diffusers
High frequency power supply
Stable output over lamp life
Easy to maintain
400W metal halide luminaire
6" (150mm) diameter light guide
Standard emitting lengths from 24" to 120" in 12" (610mm to 3m in 305mm) increments
400W mogul base ET18 metal halide lamp
15,000 hour lamp life
4000K color temperature
High frequency electronic Mercron lamp controller, 120 or 230V
Applications
